← Home Machine 01 / 02 · Industrial

[ Incept-1 · Machine 01 ]

Saturn

Industrial true-composite 3D printer

Saturn prints continuous carbon, glass and aramid fibre together with foam cores, silicones and conductive materials in a single mould-free build, for parts that have to carry load: airframes, arms, housings, structures.

  • 300 × 300 × 300 mm
  • Multi-toolhead
  • Mould-free
₹4,50,000₹3,60,000Save 20% — first orders only
01 Incept-1 Saturn industrial composite 3D printer 300 × 300 × 300 mmMulti-toolhead

One build.
No mould, no assembly.

Composite parts normally need a mould, a cure cycle and a separate assembly step to join core, skin and fittings. Saturn removes all three — the toolpath is the tooling.

Mould-free

No tooling to cut and no mould to cure against. Part geometry comes from the toolpath, not a cavity.

Multi-material, one build

Fibre, foam core and reactive functional materials are laid down in the same job, on the same machine.

Structural, not decorative

Built for parts that carry load — airframes, arms, housings — not display models or prototypes for looks alone.

Three material
systems. One toolpath.

One build sequence, three material systems, swapped mid-print by toolhead instead of moulded and bonded separately.

01ReinforcementContinuous carbon, glass and aramid fibre
02CoreRigid polyurethane foam, printed in-part
03Functional materialSilicone, epoxy, polyurethane — two-part reactive systems
Integrated partNo mould. No bonding. No separate assembly.

What it is,
in numbers

Specification is indicative until your unit is configured. We confirm every line of it on the call after you reserve.

  • Build volume300 × 300 × 300 mm
  • FibreContinuous carbon, glass and aramid
  • CoreRigid polyurethane foam, printed in-part
  • Reactive systemsSilicone, epoxy, polyurethane — two-part
  • ToolheadsMultiple, swappable per material
  • ToolingNone — mould-free fabrication
  • StagePrototype proven · first production batch Sept 2026
  • Made inNoida, India — designed, built and serviced locally

[ Built for ]

Drones & UAVsRoboticsDefence Aerospace structuresMotorsport
  • ✳Drones & UAVsUltra-light airframes, arms and payload housings that survive a hard landing
  • ✳RoboticsHigh-stiffness arms and end-effectors — less inertia, more payload
  • ✳DefenceImpact-resistant lightweight structures, printed on site if needed

Parts off
this machine

Real output from the prototype. Replace the empty frames as you photograph more.

Foam-core sandwich composite drone frame, top view
Foam-core drone frame — rigid polyurethane printed inside cubical cells for impact strength.
Foam-core drone frame seen edge-on, showing the sandwich section
The same frame edge-on: skin and core printed together, with no adhesive bondline.
Photo — machine mid-printSaturn with the door open, fibre being laid. 1000 × 750 px

Reserve a
Saturn

Compare with Mercury

harshvardhan@makevery.in · +91 93401 51871 · SF20, Spectrum Metro Mall, Phase 1, Noida – 201301
Back to home

1Your details 2Payment 3Confirmed

[ Step 1 of 3 · Your details ]

Incept-1 Saturn

Reserve a unit from the first production batch at the 20% early-order price. Fill this in, choose how to pay, and we will confirm by phone within two working days.

Your details

Enter your full name.

Enter a valid email address.

Enter a valid contact number.

Shipping address

Auto-fills city + state

Enter a valid 6-digit PIN code.

Enter a city or district.

Select a state.

Enter your address line.

Your order

Minimum 1 unit.

Please tick to continue.